Learning Outcomes

Introduction to Environmental Quality Monitoring

Environmental Quality

Chemicals of Concern

Water Quality Screening Parameters

Water Quality Parameters

Air Quality Parameters - Sustainability

PM - Particulate Matter

Lesson Summary

In this module, you will learn about pollutants in the environment, exposure pathways, their effects on organisms, screening factors and the dimensions of particulate matter.

Physical/Chemical Properties of Interest

Partition Constants

Soil-Air Partition Constants

Application-Example of Equilibrium Partitioning

In this module you will learn about physical chemical properties of interest,  partitioning of organic chemicals, measurement of partition constants and the application of partitioning in solids and water.

Introduction to Environmental Monitoring and Sampling

Environmental Sampling

Environmental Analysis: Quality Control - Part 1

Environmental Analysis: Quality Control - Part 2

In this module, you will learn about environmental monitoring and sampling, its objectives, measurement instruments and the importance of quality control and quality assurance.

Environmental Analysis of Organics in Water

Environmental Analysis: Quality Control - Part 3

Tutorial

Tutorial cont'd.

In this module you will learn about environmental analysis of organics in water, quality control and mass of A in water, air and solids.

Analysis Methods - Introduction and Water Quality Parameters

Analysis Methods - Water Quality Parameters

Analysis Methods - Review of Standard Methods

Analysis Methods - Organics in Water

Analysis Methods - Overall Methodology for Organics

Analysis Methods - Chromatography Fundamentals

Analysis Methods - Gas Chromatography

Analysis Methods - Gas Chromatography (Mass Spectrometry)

Analysis Methods - Liquid Chromatography

In this module you will learn about analysis methods, water quality parameters, review of standard methods, methodology for organics and chromatography.

Monitoring Methods for Air: PM - Part 1

Monitoring Methods for Air: PM - Part 2

Monitoring Methods for Air: Vapor - Part 1

Monitoring Methods for Air: Vapor - Part 2

Monitoring methods for Air - Vapor - Part 3

Monitoring and Measurement of Microorganisms

In this module you will learn about monitoring methods for air, covering particulate matter and vapor and the measurement of micro organisms.

Diploma in Environmental Quality Monitoring and Analysis - Course Assessment

Learn about environmental pollution, from its sources to its health effects, in this free online course.

Diploma in Environmental Quality Monitoring and Analysis

In this free online course you will learn about how a pollutant flows in the environment from emission, to how it is transported, and the health effects it has on people and living things. Several questions will be answered under the environmental risk assessments with the ultimate objective of finding out how regulatory bodies can intervene to control these effects. Start this course today and expand your skills as an environmental scientist.

In this free online course, you will be introduced to the world of an environmental scientist, where you will study topics such as how to detect a pollutant in the environment, investigate the presence of a pollutant in the environment and the health effects of pollutants. Calculations, quantitative exercises and assessment questions are designed to give you a comprehensive foundation in the profession of the environmental scientist, enabling you to take serious steps into this career.
The course is divided into three main sections. In the first section, you will be introduced to the definition of the composition of the environment or its compartments, as well as pollutants of concern and why we need to be concerned about them. This section also covers physical-chemical properties, criteria for pollution, toxicology, regulatory standards and risk assessment. The second section deals with the monitoring of environmental quality, where you will learn about specific environmental quality parameters, as well as techniques for measurement and sampling.
The third section deals with the fate and transport of chemicals, the fundamental aspects of intraface, interface transport and explaining how a chemical moves in phases. Atmospheric dispersion models are also covered, including the various factors that influence atmospheric dispersion. This course will be of interest to science or engineering students. It will also be of interest to environmental professionals and to those with a general interest in the environment. Start this course today and expand your skills as an environmental scientist.

Why Duolingo is Worth More Than Coursera and Udemy Combined

[2025] Massive List of Thousands of Free Certificates and Badges

6 Best Cyber Threat Intelligence (CTI) Courses in 2025

30+ Holiday Discounts & Online Learning Deals

5 Best Free Raspberry Pi Courses for Beginners in 2025

Coursera’s 2025 Strategy: Focusing on Campus, Scaling Back Degrees

Duolingo’s Reddit Community Revolts: ‘No Más’ to Unpaid Support

Udemy’s Last CEO Quietly Moves On: Joins a Tax & Compliance Company as CEO

The Business of Online Education: A Deep Dive Into Coursera’s Financials

Udemy Earns More, Pays Instructors Less: Class Central Exclusive

Inside the Coursera-Udemy Deal: Three Bids, Two Years and a Rival Suitor

25 Resources to Learn Generative Engine Optimization in 2025

6 Best Influencer Marketing Courses for Marketers

8 Best Crochet Courses for 2025: Practical, Enriching, Creative

Udemy is “Intentionally Reducing” the Business That Made It Famous. It’s Not Working.

Duolingo is Shutting Down Its Only Classroom Tool

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.